PFS
Premium Fibered Stucco is a dry blend of portland cement, chopped fiberglass
reinforcements, micro fibers for added strength and crack resistance, and graded
aggregates, and speciality modifiers designed to enhance workability and curing.
The PFS Premium Fibered Stucco is available in 50lb bags in Gray and White colors.
PFS Premium Fibered Stucco may be top coated with the PSF Stucco Finish Coat,
Total Wall Lastic Elastomeric Coating or Textured Finish Coats. topsizes/colors
PFS
Premium Fibered Stucco Concentrate is a dry blend of portland cement, chopped
fiberglass reinforcements, micro fibers for added strength and crack resistance,
graded aggregates, and specialty modifiers designed to enhance workability and
curing. Just add sand and water and the PFS Stucco Concentrate can be used as
standard stucco, one coat, or a high build stucco. PFS Stucco Concentrate is
available in 50 & 80lb bags and Gray & White colors. The PFS Premium Stucco
Concentrate may be top coated with the PSF Stucco Finish Coat, Total Wall Lastic
Elastomeric Coating or Textured Finish Coats. topsizes/colors
PFS
Premium Stucco Finish Coat is a dry blend of portland cement, and micro
fibers for added strength and crack resistance, graded aggregates, and specialty
modifiers designed to enhance workability and curing. Just add water and PFS
Premium Stucco Finish Coat will per-form as a quality stucco finish coat. The
PSF Premium Stucco Finish Coat is available in 50lb bags. The color selection
starts with a white or gray base and may be tinted for added color enhancement.
topsizes/colors
Acrylic
ST 88 Admix is a high solids 100% acrylic emulsion, which is used as an
add mixture for Hard Coat, Stucco, Structural Skin, Plaster Mix, Bulk Foundation
Coating, Waterproofing and a variety of other cement based products, Total Wall’s
Acrylic, Acrylic ST 88 AdMix increases bond, hardness, resilience, water resistance,
reduces efflorescence, and cracking. Acrylic ST 88 AdMix is also available in
a higher solids concentrated formula. topsizes/colors
1/4”
Fiber Glass Reinforcements are treated with an alkali resistant coating
and are used as an additive for various cement based products including stucco
to add strength, impact resistance, workability and crack resistance. topsizes/colors
Micro
Fiber Reinforcements are used as an addictive for various cement based products
including stucco to add strength, impact resistance, workability and crack resistance.
topsizes/colors
Matrix
Additive is a special blend of specialty additives, and reinforcement fibers.
The Matrix Additive is designed to enhance the workability and strength of the
One Coat Hard Coat mix. It also adds extra body to the mix for field applied
exposed aggregate applications. topsizes/colors
Monobase
BC Concentrate is a traditional European stucco scratch coat concentrated
product with the unique benefits of vapor permeability, fiber reinforcement
and water repellency - unmatched in the industry to accept a finish coat such
as Sider-Plast Finish, MonoSideral, Sideral 2000, etc. [Packaging: One 45 lb.
bag] top
MonoSideral
is the traditional European hard coat stucco featuring the unique additional
benefits of Water repellency & vapor permeability, 18 standard factory blended
integral colors, Non-combustible & non-flammable which are not found in any
other similar products on the market today. MonoSideral provides the natural
solution when a consistently colored interior or exterior stucco wall finish
is desired. [Packaging: One 66 lb. bag] top
Sideral
2000 Made with Crystal Fiber®, Sideral 2000 is the Next Generation hard
coat decorative coating finish featuring the benefits of Vapor permeability
& water repellency, Non-flammable & non-combustible, 18 standard factory blended
integral colors and is made with the patented Crystal Fiber® technology. This
technology creates a hard coat decorative coating finish that is lightweight
and flexible, properties unparalleled in the decorative coating industry. [Packaging:
One 110 lb kit contains 1-66 lb bag of paste & 1-44 lb bag of powder] top
Power
Base is the ultimate traditional approach in exterior decorative finish
systems specifically designed for insulated wall systems. The unique and revolutionary
lightweight composition and reinforcing fibers of Power Base combined with the
very specific integral color formulation of Monosideral, yield a durable, fade
resistant, colored “Old World” finish to be applied by hand troweling or spraying
directly over insulated blocks, expanded or extruded polystyrene. [Packaging:
One 55 lb bag of powder in a 3-ply paper bag with moisture barrier.] top
Power-Base
AAC is a durable polymer-modified interior or exterior leveling product
for use over autoclaved aerated concrete and specifically designed for AAC Power
Panels. Power-Base AAC performs like a protective skin that will not trap moisture.
Use as a level coat for exterior or interior AAC surfaces. Non-shrink and allows
application of finish coat in 24 hours (depending on ambient conditions). [Packaging:
One 55 lb bag of powder in a 3-ply paper bag with moisture barrier.] top
Sider
Base Concentrate is a cost saving alternative for an AAC base coat - A Concentrated
Powder, add your own masonry sand and water at the site. [Packaging: One 55
lb. bag] top
Mono-base
LW is a lightweight ready to use, base coat is easy to apply, renders a
beautiful smooth finish to accept a finish coat such as Sider-Plast Finish,
MonoSideral, Sideral 2000, etc. [Packaging: One 66 lb. bag] top
Mono
Sideral AAC is made with Crystal Fiber®, Sideral AAC provides the natural
solution for a hard coat finish for Autoclaved Aerated Concrete (AAC) block
and surfaces. Sideral AAC is an integrally colored, lightweight, flexible decorative
coat- ing that is water repellent and vapor permeable, and comes in 18 standard,
factory blended integral colors that allow for a one-step application and prevents
a "splotchy" color finished appearance. [Packaging: One 110 lb kit
contains 1-66 lb bag of paste & 1-44 lb bag of powder.] top
Sider
GYP AAC is a ready-to-use, interior wall and ceiling gypsum plaster coating
product. Simply mix with potable water and SiderGyp AAC is ready for application
directly to Autoclaved Aerated Concrete (AAC) blocks, surfaces and gypsum board
products. Use SiderGyp AAC is primarily applied on interior wall and ceiling
areas to cover Autoclaved Aerated Concrete. [Packaging: One 55 lb bag] top
Sider
GYP is a one coat, interior wall and ceiling gypsum plaster coating product
used to level and/or resurface walls and ceilings to accept Paint, Wallpaper,
An additional coat of SiderGyp to create a textured finish and is the natural
choice for wall repair and leveling. SiderGyp is primarily applied on interior
wall and ceiling areas in a thickness ranging from 1/16" (1.6 mm) to 3/16" (5
mm). [Packaging: One 66 lb bag] top
Oxy
Cold is a non-chloride based, ready-to-use, concrete admixture designed
to allow concrete placement in cold weather environments. Use OxyCold is especially
useful for Increasing concrete cure rates in cold weather, Concrete mixes used
for forming prefabricated concrete Limitations. Do not use with partially set
or frozen concrete. Do not under or over use the correct mixture ratio of OxyCold
with cement to achieve desired results. [Packaging: 5 Gallon (20 liter) pails,
55 Gallon (210 liter) drums] top
Oxy
Heat is a non-chloride based, ready-to-use concrete, masonry and mortar
admixture designed to allow installation in hot weather environments. [Packaging:
1/2 Quart, 5 Gallon pails, 55 Gallon drums] top
Sider
Resin is an exceptional bonding agent that is a white, aqueous copolymer
synthetic resin emulsion for applications on walls or overhead applications.
The unique plasticizing properties of SiderResin-M allow for maximum stabilization
of the substrate and serves as the perfect bonding medium when resurfacing walls
and overhead applications with such products as SiderWall-F, SiderWall-T, SiderRefit-F,
SiderRefit-T and a variety of coating products. [Packaging: 4 Each - 5 quart
carton, 10 Each - 2 quart, 1 Each - 5 gallon pail] top
