The Acudor ADWT Access Door is a flush access door that has been tested for air infiltration and water penetration. The door and frame are fully welded and gasketed.

This access door is ideal for use in laboratories, clean rooms, operating rooms, etc. where an airtight and watertight seal is required. The Acudor ADWT Access Door is available in stainless steel or prime coated.

• Continuous Bulb Trim Gasket
• Flush Access Door
• Door and frame are fully welded
• Continuous Stainless Steel Piano Hing
• Tested for air infiltration, exfiltration, and water penetration
• Water Penetration : No leakage at 15.04 psf – ASTM E 331-00(2016)
• Air Infiltration : Leakage ≤ 0.01 cfm/sq foot at 6.27 psf – ASTM E 283/E283M-19

ADWT Access Door Specifications

• Door / Door Frame: Flush to frame with reinforced edges Stainless Steel: 16 gauge door; 16 gauge mounting frame
• Hinge: Continuous exposed stainless steel piano hinge
• Gasket: Continuous Bulb Trim Seal
• Standard Latch: Stainless Steel philllips head screws standard
• Optional Latches/Locks: Stainless steel allen head screws, stainless steel spanner head screws, torx, cylinder lock and key
• Finish: 5-stage iron phosphate preparation with prime coat of white alkyd baking enamel OR Stainless Steel: Type 304 - #4 satin polish

ASTM E283/E283M-19

Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen”, for Air Infiltration & Exfiltration at 300Pa (6.27 psf) with result of maximum leakage ≤ 0.1 L/s/m² (0.01 cfm/ft²)

ASTM E331-00(2016)

Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference”, for Water Penetration resistance at 720Pa (15.04 psf) with result of no leakage.